Structural Concrete
Издатель: Wiley · ISSN 14644177 · 15 статей
-
Contribution of polyethylene fibers on the static and dynamic mechanical properties of lightweight cement‐based materials prepared with Enteromorpha prolifera powder
Abstract This study investigates the effects of polyethylene (PE) fibers on the flowability, density, thermal conductivity, static and dynamic mechanical properties of Enteromorpha prolifera powder (EPP)‐based lightweight cementitious...
-
Mechanism of surface alkali leaching and chemical degradation within the wetting zone subjected to semi‐immersed MgSO 4 sulfate attack
Abstract Concrete subjected to semi‐immersion in sulfate environments exhibits pronounced spatial heterogeneity in deterioration, particularly in the region above the water line. In this zone, capillary transport and moisture...
-
Behavior and design of concrete‐filled steel stub columns incorporating sandstone quarry waste aggregate
Abstract Rapid depletion of natural aggregates and growing accumulation of quarry waste have intensified the need for structurally viable, waste‐derived construction materials. Sandstone quarrying and processing in Rajasthan (India),...
-
The modified tension chord model for reinforced concrete structures in service conditions: Accounting for the effects of internal cracks and concrete cover
Abstract Crack width control is a primary serviceability requirement in reinforced concrete design, yet current models— fib Model Code 2020 and Eurocode 2 included—rest on three simplifying assumptions that conflict with experimental...
-
Mechanical behavior and fracture evolution of waste tire fiber‐reinforced coal gangue‐fly ash cemented paste backfill
Abstract To improve the brittle cracking resistance of cemented paste backfill (CPB) used as an artificial roof in underhand cut‐and‐fill mining, waste tire fiber (WTF) was incorporated into coal gangue‐fly ash CPB to prepare...
-
Cyclic tensile behavior and component‐based modeling of box connections in prefabricated concrete elevator shafts for retrofitting old dwellings
Abstract An innovative prefabricated concrete elevator‐shaft system with a prestressing‐box hybrid connection was developed for old dwelling renovation to achieve rapid installation and reliable seismic performance. However, as the key...
-
Segmented Chord Model for reinforced concrete subjected to reversed cyclic axial loading
Abstract This paper introduces the Segmented Chord Model (SCM): A deterministic, algorithm‐based model for numerically efficient simulation of the load‐deformation behavior of reinforced concrete subjected to reversed cyclic axial...
-
Service life prediction of reinforced concrete beams under chloride‐induced non‐uniform corrosion using reliability approach
Abstract Chloride‐induced corrosion degrades the cross‐section and yield strength of reinforcement, but existing life prediction models often neglect the strength degradation and lack sensitivity analysis. This study developed a service...
-
Role of metakaolin, alccofine, and silica fume as supplementary cementitious materials in improving durability performance of self‐compacting geopolymer concrete
Abstract Geopolymer concrete (GC) provides indispensable environmental advantages over conventional cement‐based concrete. However, attaining European Federation of National Associations Representing Concrete (EFNARC) standard...
-
Resistance factor calibration for fiber‐reinforced polymer‐reinforced concrete columns based on a sectional analysis model with fiber‐reinforced polymer compression contribution
Abstract This study aims to calibrate the reliability‐based resistance factor ϕ for a sectional model predicting the load‐carrying capacity of rectangular fiber‐reinforced polymer‐reinforced concrete (FRP‐RC) columns under eccentric...
- Restoration, transformation of the Salève cable car, France
-
A prediction method for the compression‐bending capacity of horizontal joints in externally prestressed wind turbine towers
Abstract Accurate evaluation of compression‐bending capacity is essential for the design of concrete wind turbine towers. After a horizontal joint opens, the unbonded external tendons do not follow the local concrete strain...
-
Engineering one‐part geopolymer for 3D printing using dolomite powder: Rheology, printability, microstructure and sustainability
Abstract The widespread adoption of one‐part geopolymer cementitious composites for additive manufacturing is constrained by the declining availability of conventional precursors such as fly ash and the limited understanding of...
-
Seismic performance of prefabricated reinforced concrete joints with embedded steel plate welding connection
Abstract Prefabricated reinforced concrete (RC) beam‐column joints are critical components in prefabricated structures, and their connection details have a significant influence on seismic performance. Traditional prefabricated joints...
-
Experimental and numerical investigation of double‐embedded blind‐bolted concrete‐filled steel tube connections subjected to cyclic tension load
Abstract Concrete‐filled steel tubular (CFST) columns with limited accessibility require the use of blind‐bolted connections in beam‐to‐column joints. This study investigates the tensile behavior of single anchored blind‐bolted...