Биоматериалы
25 статей · 1 журналов
Динамика публикаций
Журналы подкатегории (1)
- Journal of Wood Science · Springer Nature (25)
-
Identification of the wood species in the wooden sheath of Indonesian kris by synchrotron X-ray microtomography
A kris is a traditional dagger that originated in Indonesia. A kris is distinguished by its asymmetrical blade, which has layers of different metals bonded on its surface. Wood is the main material used to make the kris sheath. To...
-
Lipopolysaccharide from Yoshino cedar trees (Cryptomeria japonica) induces high levels of human macrophage polarization
Japanese cedar, Cryptomeria japonica, is an evergreen conifer native to Japan and is often used as a building material. The humidity control properties of wood are known, but there have been few detailed analyses of its effects on...
-
Control of system parameters by estimating screw withdrawal strength values of particleboards using artificial neural network-based statistical control charts
In this study, with data obtained from a particleboard factory, screw withdrawal strength (SWS) values of particleboards were estimated using artificial neural networks (ANNs). Predictive control charts were also created. A total of...
-
Influence of boundary conditions on acoustic emission propagation characteristics of Zelkova schneideriana
To study the propagation characteristics of acoustic emission signals in Zelkova schneideriana under different boundary conditions, three types of boundary conditions were generated by applying aluminum plates and sound-absorbing cotton...
-
Revisiting the condensation reaction of lignin in alkaline pulping with quantitativity part III: predominant formation of α-β-type over α-5-type condensation product in soda cooking treatments of apocynol and creosol
Progress in the condensation of lignin is believed to interfere with delignification in alkaline pulping processes without any clear evidence, which motivated us to revisit it quantitatively. This study is the 3rd in the series which...
-
Multi-objective optimization of particle gluing operating parameters in particleboard production based on improved machine learning algorithms
Particle gluing operating parameters in particleboard (PB) production have an important influence on the mechanical properties of PBs. This study developed a multi-objective optimization model based on support vector regression (SVR)...
-
Fuel and material utilization of a waste shiitake (Lentinula edodes) mushroom bed derived from hardwood chips II thermal conductivity of compression-dried waste mushroom beds
This study investigated using waste mushroom beds as insulation material and applied compression-drying to eliminate the coarse voids that are unfavorable for insulation. The relationship between air-dry density and thermal conductivity...
-
The variability of terpenoids and flavonoids in native Lindera umbellata from the same region
The leaves and twigs of Lindera spp. have long been used as a herbal medicine and toothpicks in Japan. However, little is known about individual variations in the extractives of these species, because many previous studies have not...
-
Wood density and microfibril angle from pith to bark of a sugi cultivar (Cryptomeria japonica, Japanese cedar, Tosaaka) grown in a Nelder plot
The current stumpage price in harvesting of a 50-year-old sugi (Japanese cedar, Cryptomeria japonica ) plantation is not enough to motivate forest owners to reforest. Therefore, it is vital to reduce the cost for reforestation after...
-
Examination of Cinnamomum camphora interlocked grain adopting X-ray computed tomography combined with particle image velocimetry
Trees develop wood grain more or less parallel to the tree axis as they grow laterally. However, many tree species also develop interlocked grain that is expressed as a change in the wood grain orientation, periodically switching...
-
Effects of the presence or absence and the position of glued edge joints in the lamina on the shear strength of glued laminated timber
Four kinds of glued laminated timber were produced (i.e., one with a glued edge-joint and the other three with nonglued edge joints) in the lamina at different positions toward the depth direction. Shear tests using an asymmetric...
-
Structural diversity of natural cellulose and related applications using delignified wood
Cellulose is synthesized by organisms belonging to each biological kingdom, from bacteria to terrestrial plants, leading to its global-scale distribution. However, the structural properties of cellulose, such as its microfibril size,...
-
Combined analysis of microstructures within an annual ring of Douglas fir (Pseudotsuga menziesii) by dynamic mechanical analysis and small angle X-ray scattering
Dynamic mechanical analysis (DMA) and small angle X-ray scattering (SAXS) measurements of water-saturated wood of Douglas fir ( Pseudotsuga menziesii ) in the temperature range of 0 ℃ to 100 ℃ were focused to clarify microstructural...
-
Elastic interaction in multiple bolted timber joints
The management of axial forces is an important issue when a joining method that takes into account the axial forces generated by tightening bolts is applied to the bolted joints of a wooden structure during construction. This study...
-
Demethylation and tannin-like properties of guaiacyl/syringyl-type and syringyl-type dehydrogenation polymers using iodocyclohexane
The demethylation of guaiacyl/syringyl (G/S)-type (G/S = 1/1) and syringyl (S)-type dehydrogenation polymers (DHPs) using iodocyclohexane (ICH) under reflux in DMF was performed to afford demethylated G/S- and S-DHPs in moderate yields....
-
Research on the wood processing method of helium-assisted laser process
In order to promote the development of environmental protection, and the usage rate of green energy utilization, a progressive, innovative laser process method employing helium assisted is proposed, which optimizes the joint cutting...
-
Effect of wood attributes on the price persistence of acoustic guitars
Wood attributes are important, because they directly affect the price persistence of wood products. Consumers consider the “aesthetic,” “traditionality,” “decay resistance,” and “scarcity” attributes important when evaluating wood. This...
-
Relationship between the xylem maturation process based on radial variations in wood properties and radial growth increments of stems in a fast-growing tree species, Liriodendron tulipifera
Promoting wood utilization from fast-growing tree species is one solution to address supply and demand issues relating to wood resources while sequestering carbon dioxide in large quantities. Information on the quality of wood from...
-
Composition analysis of exudates produced by conifers grown in Taiwan and their antifungal activity
Exudates are involved in the defense mechanism of trees; they could work against insects or microorganisms through a physical or chemical system. The main components of exudates are terpenoids. This study identified the main compounds...
-
The effects of watering on cambial activity in the stems of evergreen hardwood (Samanea saman) during the pre-monsoon season in subtropical Bangladesh
Water stress has a significant impact on tree growth. However, the effects of watering on cambial activity and its influence on tree growth in subtropical climates is poorly understood. The present study analyzed the cambial activity on...
-
Synthesis of highly deuterated coniferyl alcohol for silencing of NMR signals in the resulting dehydrogenative polymer
To establish a facile methodology for the elucidation of the lignin chain-growth mechanism, the preparation of monolignol that does not show NMR signals in the dehydrogenative polymer (DHP) was attempted. As a monolignol of which...
-
Experimental study on the embedment strength of smooth dowels inserted in cross-laminated timber narrow side
The embedment properties of the dowel-type fasteners is a fundamental parameter that can determine the shear resisting performance of the connections utilized in cross-laminated timber (CLT) structures. To investigate the embedment...
-
Interaction between particle size and mixing ratio on porosity and properties of tea oil camellia (Camellia oleifera Abel.) shells-based particleboard
This study investigated the interaction between particle size and mixing ratio on the porosity of particleboard and in consequence its effect on the physical and mechanical properties of panels. Tea Oil Camellia Shell (TOCS), which...
-
Comparison of the elastic limit and yield load of nailed joints connecting solid wood and wood-based board material
Evaluations of the lateral properties of timber joints are necessary to ensure the safety of timber buildings. The yield load is an important property that is usually obtained using authorized engineering techniques. Although yield...
-
Experimental and nonlinear finite-element analysis study on lateral push resistance of San-dou components perpendicular and parallel to grain in traditional timber buildings
Dou-gong is an essential part of traditional timber buildings in East Asia, having a decoration function and a load transfer function. The San-dou component, which is vulnerable to the lateral push force of the Gong, Fang, and purlin,...