Биоматериалы
15 статей · 1 журналов
Динамика публикаций
Журналы подкатегории (1)
- International Journal of Adhesion and Adhesives · Elsevier (15)
- Evaluation of the mechanical behaviour of SLJ joints using numerical methods and uncertainties
- Multi-step surface treatment of AA-2024-T3 produces failure mode transition and interfacial strengthening in carbon fiber aluminum laminates
- Failure simulation and life prediction of adhesive interface in engine double-layer casing considering aging effects
- Influence of the carbon chain distribution of synthetic gas-to-liquids (GTL) extender oils in the curing and the mechanical properties of silicone elastomers
- Temperature dependency of Mode I fracture toughness in ductile structural adhesives: Experimental characterization and cohesive zone modeling
- The influence of zeolite powder partially replacing magnesium oxide on the performance of magnesium oxychloride cement
- Adhesion properties of asphalt mastic incorporating modified red mud filler: Insights from laboratory tests and quantum chemistry calculations
- Repair of direct restorative materials with a self-adhesive composite hybrid: Effects of substrate, surface pretreatment, and aging
- Mechanisms of peel adhesion enhancement by tackifiers through a comparative analysis of peel and probe tack tests
- Analytical modeling for stress distribution in single-sided adhesively bonded composite patch repair of cracked metallic panels
- A room-temperature curable silicate adhesive with water and high temperature resistance for application in thermal protection systems
- Synergistic effects of substrate topography and phase-transformation-induced porosity in low-cost un-stabilized zirconia bond coats for flame-sprayed hydroxyapatite coatings
- Preparation and characterization of high-weather-resistant two-component polyurethane thermally conductive structural adhesive
- Beyond traction–separation laws: High-fidelity modeling of mixed-mode damage in adhesively bonded single-lap shear joints
- Bioactive hydrophobic bonding resins containing fluoroaluminosilicate particles and polyacrylic acid for experimental two-step self-etch adhesive systems: Mechanical behavior, ion release, cell viability, and calcium phosphate surface precipitation